- Phase rotation is determined by taking readings on the two phases; first in one direction, then the other. The meter will indicate which phase is leading and which is lagging.
- The Phase Rotation Meter can be used in overhead applications with the included probes, or underground by adding the appropriate underground probes for each application.
- All meters require the use of accessory hotsticks, which are not be supplied with the meter. The minimum hotstick length required for safe use depends upon the particular operation; consult federal, state, company or OSHA specifications for the proper hotstick length for the intended operation.
- The Phase Rotation Meter is constructed with epoxy encapsulated high voltage resistors, a connecting cord, a ground lead and a meter display.The high voltage resistors limit the current through the connecting cord to a maximum of about one milliamp. Although the connecting cord is insulated for voltage up to 10kV, it should always be kept free and clear from you, ground and any other conductors.
|