* Best in class 0.2 % accuracy
* 0.01 mA resolution and sensitivity
* Measure 4 to 20 mA signals without ”breaking the loop”
* Measure mA signals for PLC and control system analog I/O
* Dual backlit display with both mA measurement and percent of 4 to 20 mA span
* Measurement Spotlight illuminates hard to see wires in dark enclosures
* Detachable clamp with extension cable for measurements in tight locations
* Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
* Automatically change the 4 to 20 mA output for remote testing
* Power saving features, auto-off, backlight timeout extend battery life
* Hold function captures and displays changing measurements
* Measure 4 to 20 mA signals with in-circuit measurement
* Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
* Source 4 to 20 mA signals for testing control system I/O or I/Ps
* mA output linear ramp or 25% step output
* Automatically change the 4 to 20 mA output for remote testing
* DC voltage measurement to verify 24V power supplies or voltage I/O signals
* Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals
* Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
o Enables milliamp signal logging to a separate logging device without breaking the loop
o Output mA signal enables a logging DMM or other device to record the 4- to 20 mA signal without breaking the loop
* mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
o Apply a mA input signal to a device and measure its’ 4-20 mA output on devices such as valves or mA isolators
* Voltage output linear ramp or 25% step output
o Automatically change the voltage output for remote testing
|