• Best in class 0.2 % accuracy
• 0.01 mA resolution and sensitivity
• Measure 4 to 20 mA signals without ”breaking the loop”
• Measure mA signals for PLC and control system analog I/O
• Dual backlit display with both mA measurement and percent of 4 to 20 mA span
• Measurement Spotlight illuminates hard to see wires in dark enclosures
• Detachable clamp with extension cable for measurements in tight locations
• Measure 10 to 50 mA signals in older control systems using the 99.9 mA range<
• Automatically change the 4 to 20 mA output for remote testing
• Power saving features, auto-off, backlight timeout extend battery life
• Hold function captures and displays changing measurements
Practical Instruments PIE334 Loop Calibrator
• Much more responsive display makes for easier and faster adjustments
• Protective rubber boot for toolbox toughness
• 1000% improvement in battery life allows up to 125 hours of nominal use per battery change
• Source 0.00 to 24.00 mA (-25% to 125%)
• Read 0.00 to 52.00 mA (-25% to 300%)
• Simulate 2-Wire Transmitters 0.00-24.00mA
• Power and read 2-Wire transmitters 0.00-24.00 mA
• Better than ±0.025% of reading accuracy (± 1/2 lsd)
• Large, high contrast graphic display (.413” digits)
• EZ-Dial Knob - Easily adjust output by 0.01 mA
• EZ-Check Switch will instantly output 4.00 mA, 20.00 mA or dial knob user set output
• Slide switches allow for easy to use operation