DS 500 -intelligent chart recorder for compressed air and gases

DS 500 -intelligent chart recorder for compressed air and gases

Mã sản phẩm

:

Giá bán

: Liên hệ

Kho hàng

: Còn hàng

Số lượng:

Article no: 0500 5000

From recording of the measured data, automatic sensor identification, indication on a big colour screen, alerting, storage up to remote read-out via webserver … this is all possible with DS 500. By means of the CS Soft software alarms can be sent via SMS or e-mail. On the big 7" colour screen with touch panel all information are available at a glance. The operation is very easy.

All measured values, measured curves and threshold exceedings are indicated. The curve progressions from the beginning of the measurement can be viewed by an easy slide of the finger. Daily/weekly/monthly reports with costs in € and counter reading in m³ for each consumption sensor are completing the sophisticated system concept. The big difference to ordinary paperless chart recorders reveals in the easy initiation and in the evaluation of the measured data. All sensors are identified directly and powered by DS 500. Everything is matched
and tuned.

No time consuming studying of the instruction manual … this saves time. Internal voltage supply of all sensors, no wiring of external mains units … this saves additional costs.

Advantages at a glance:
- Clear layout: 7" colour screen with touch panel…
- Versatile: Up to 12 optional sensors can be connected…
- Easy: Very easy operation, automatic sensor identification…
- Reliable: Stores all measured values reliably, 4 alarm relays for threshold exceedings...
- Suitable for industrial applications: Metal housing IP 65 or panel mounting…
- Data available though world wide web: Network-compatible and remote transmission via webserver
- Intelligent: Daily/weekly monthly reports…
- … Saves time and costs during installation

Dimensions of housing	280 x 170 x 90 mm, IP 65
Connections	18 x PG 12 for sensors and supply, alarm relays 1 x RJ 45 Ethernet connection
Version panel mounting	Cutout panel 250 x 156 mm
Weight:	7.3 kg
Material	Die cast metal, front screen polyester
Sensor inputs	4/8/12 sensor inputs for analogue and digital sensors freely allocatable. See options Digital CS sensors for dew point and consumption with SDI interface FA/VA 400 Series, Digital third-party sensors RS 485 / Modbus RTU, other Bus systems realizable on request Analogue CS sensors for pressure, temperature, clamp-on ammeters preconfigured Analogue third-party sensors 0/4 ..20 mA, 0..1/10/30V, pulse, Pt 100 / Pt 1000, KTY
Power supply for sensors	Output voltage: 24 VDC ± 10% galvanically isolated Output current: 130 mA non-stop operation, Peak 180mA maximum output current over all channels with - one power supply: 400m - second power supply (optional): 1A
Interfaces	USB stick, USB cable, Ethernet / RS 485 Modbus RTU / TCP, SDI other bus systems on request, WEB server optionally
Outputs	4 relay (max. switching voltage: 400 VAC / 300 VDC, min circuit current of 10mA 6A..), Alarm management, Programmable relay, general alarm Analog output, impulse for sensors with own Output signal looped through e.g. VA / FA Series
Memory card	Memory size 2 GB SD memory card standard, optionally up to 4 GB
Power supply	100...240 VAC / 50-60 Hz, special version 24 VDC
Colour screen	7" touch panel TFT transmissive, graphics, curves, statistics
Accuracy	see sensor specifications
Operating temperature	0...50°C
Storage temperature	-20...70°C
Optionally	Web server
Optionally	Quick measurement with 10 ms sampling rate for analogue sensors, Max/Min indication per second
Optionally	Option "consumption report” statistics, daily/weekly/monthly report

Input signals

Current signal internal or external power supply Measuring range Resolution Accuracy Input resistance	(0...20mA/4...20mA) 0…20 mA 0,0001 mA ± 0,003 mA ± 0,05 % 50 Ω
Voltage signal Measuring range Resolution Accuracy Input resistance	(0...1 V) 0…1 V 0,05 mV ± 0,2 mV ± 0,05 % 100 kΩ
Voltage signal Measuring range Resolution Accuracy Input resistance	(0...10 V / 30 V) 0…10 V 0,5 mV ± 2 mV ± 0,05 % 1 MΩ
RTD Pt 100 Measuring range Resolution Accuracy	-200…850° C 0,1° C ± 0,2°C (-100...400°C) ± 0.3°C (further range
RTD Pt 1000 Measuring range Resolution Accuracy	-200…850° C 0,1° C ± 0,2° (-100...400°C)
Pulse Measuring range	min pulse length 400 μs frequency 0...1 kHz max. 30 VDC bar high: 2.5V bar low: 0.7V

Description	Version	Format/Size
DS 500 Leaflet	V 1.0	pdf (500 KB)
DS 500 mobile Leaflet	19042012	pdf (2.7 MB)
DS 500 Manual	V 1.47	pdf (5.8 MB)
DS 500 Firmware	V 1.75	zip (10.3 MB)
Installing Add-In	V 1.0	pdf (164 KB)
DS 500 Export	V 1.0	pdf (287 KB)
DS 500 Export xls	V 1.0	xls(188KB)
Measurement of compressed air consumption - minimization of energy loss - DS 500	25042012	pdf (275 KB)