Extremely easy to use
One universal transmitter- automatically switches to work with either energized or non-energized systems
Receiver not position sensitive- does not need to be rotated in order to provide accurate readings
Traces live wires buried or hidden behind walls
Traces energized and non-energized (open, broken) wires
Performs tests without having to interrupt power
Locates breakers, neutrals, and ground lines
Locates and traces wires in walls, floors, conduit, computer cables, etc.
Pinpoints shorts, ground faults and broken wires
Does not interfere with sensitive electronic equipment
Precise sensitivity adjustment
R-4000CON Receiver
It has two built in detectors that are tuned to pick up the 32.768Khz signals generated by the T-4000 transmitter. The R-4000CON is designed to display the signal strength to enable quick locating of the conductor carrying the signal.
T-4000 Transmitter
When connected to an energized circuit, the T-4000 will filter the low frequencies up to 400Hz and rapidly indicate on the display that the wire is energized. When the user starts the transmission, a combination of signals is injected on top of the 50, 60, or 400Hz that cause a slight, periodic current fluctuation and allows the power line to emit its own, traceable signal. This signal can be detected back to the main generator. However, the signal will not interfere with any sensitive electronic equipment and does not require power interruption. The unit is intrinsically safe and has a ‘LOW’ signal transmission setting that must be used when tracing GFCI-protected circuits.