Compact Design: Fits in the palm of your hand (6"L x 2"W x 1.5"D)
Visual Indicator: 1 LED (Variable Frequency)
Audible Indicator: Loud audible ticking rate
2 Sensitivity Levels: Aids in pinpointing both large and small leaks
Operational Status LED: Provides visual indication of instrument’s operational state
Long Battery Life: Four AA batteries provide 14 hours of operation
Lower Power Metal Oxide Sensor: Plug-in sensor
12 Inch Flexible Probe: For taking measurements in hard-to-reach locations
Tough ABS Plastic Housing: Durable and rugged
UL Classified for Class I, Div. 1 groups A, B, C & D hazardous locations
Testing For a Gas Leak
1. Turn instrument ON and allow it to warm up (approximately 60 seconds).
2. The instrument is ready to check for gas leaks after the audible alarm begins to
beep. Note that the instrument starts in its high-sensitivity mode.
3. Check for the presence of gas by positioning the tip of the flexible probe near the
area to be tested.
4. An increase in the relative concentration of gas is indicated by the visual alarm’s
LED blinking faster and the audible alarm’s beep rate increasing.
5. Once the presence of the gas has been confirmed, the instrument’s sensitivity
can be lowered by double pressing the ON/OFF button (a decreasing frequency
tone should be heard), allowing the location of the leak to be easily pinpointed.